Copyright © 2017 For Leaves Limited
News Center

For Leaves Limited, founded in 2012, specialized in production of PV module. Now mostly focuses on the customized solar panel, like semi flexible, ETFE panel and other special type & materials solar panel. Meanwhile, offer the complete solution of dc charging system.

Ur Location :
Solar Electric Photovoltaic Modules
Source: Solar Direct | Author:For Leaves Ltd | Publish time: 2015-08-02 | 6168 Views | Share:

Photovoltaic Array

A PV Array consists of a number of individual PV modules or panels that have been wired together in a series and/or parallel to deliver the voltage and amperage a particular system requires. An array can be as small as a single pair of modules, or large enough to cover acres. 

12 volt module is the industry standard for battery charging. Systems processing up to about 2000 watt-hours should be fine at 12 volts. Systems processing 2000 - 7000 watt-hours will function better at 24 volt. Systems running more than 7000 watt-hours should probably be running at 48 volts.

Follow the link below to see samples of complete photovoltaic-based electrical systems: Configured Solar Electric Systems

Photovoltaic Module Performance

The performance of PV modules and arrays are generally rated according to their maximum DC power output (watts) under Standard Test Conditions (STC). Standard Test Conditions are defined by a module (cell) operating temperature of 25o C (77 F), and incident solar irradiant level of 1000 W/m2 and under Air Mass 1.5 spectral distribution. Since these conditions are not always typical of how PV modules and arrays operate in the field, actual performance is usually 85 to 90 percent of the STC rating.