• Facebook
  • Twitter
  • Linkedin
  • Apple

Products

FL‑2216 Micro Solar Panel 5V 10mA for Red Dot Sight & Compact IoT Devices


FL‑2216 mini SMT solar panel 5V 10mA micro PV module for red dot sight and compact IoT devices

P/N: FL‑2216

5.22V 10mA

22×16×1.5mm

SMT Surface Mount

BC Cell 25% Efficiency

Micro PV for Red Dot Sight & IoT

FL‑2216 is an ultra-small SMT surface-mount solar module laminated with matte anti-glare film. It adopts high efficiency BC back contact solar cells with 25% conversion rate, delivers stable 5.22V 10mA output under standard test condition, developed primarily as backup power source for red dot reflex sights, also suitable for a wide range of miniature low-power IoT electronics.

Matte surface eliminates strong light reflection, avoids glare interference for optical sight products. The compact 22×16×1.5mm footprint fits tightly into limited housing space of micro embedded equipment and supports surface mounting onto PCB.

Key Features

  • Ultra compact size: 22 × 16 × 1.5 mm for highly constrained product enclosures
  • Matte anti-glare lamination film, reduces surface reflection for optical sight integration
  • High performance BC back contact solar cell, 25% conversion efficiency
  • Electrical rating: Vmp 5.22V, Imp 10mA, Voc 6.12V, Isc 11mA
  • Predefined SMT pads for surface mounting on PCB
  • Low-light responsive cell, provides trickle charging for tiny coin cells and micro batteries
  • Flat thin profile, easy to embed on top shell of red dot sight and miniature sensors
  • Uniform matte appearance, consistent visual effect for finished consumer and optical products
  • Custom pad layout, outline shape and electrical parameters available for OEM projects

Typical Applications

This micro SMT solar module is optimized for tiny low-power embedded devices:

  • Red dot reflex sight solar backup power & auto brightness sensing
  • Miniature asset tracking tags and compact GPS trackers
  • Small wireless environmental & temperature/humidity IoT sensors
  • Wearable micro electronics and compact self-powered labels
  • Ultra-low-power remote monitoring modules with limited installation area

Similar Products

6V 5mA Micro SMT Solar Panel | 0.36W 6V Mini SMT Solar Panel | 0.4W 5V SMT Solar Panel | 1W Round ETFE SMT Solar Panel

We supply a full range of SMT, FPC and rigid mini solar panels for optical sight, wearable and IoT manufacturers. Custom outline, voltage and pad design are supported.

Technical Specifications

  • Model Number: FL‑2216
  • Voltage at Maximum Power (Vmp): 5.22 V
  • Current at Maximum Power (Imp): 10 mA
  • Open‑circuit Voltage (Voc): 6.12 V
  • Short‑circuit Current (Isc): 11 mA
  • Overall Dimension: 22 × 16 × 1.5 mm
  • Surface Material: Matte anti-glare lamination film
  • Cell Type: BC solar cell, 25% efficiency
  • Mounting Type: SMT surface mount, pre-designed solder pads
  • Operating Temperature: ‑20 ℃ ~ +65 ℃

Custom Mini SMT PV Solutions

FORLEAVES provides OEM & ODM service for micro SMT solar panels. We can adjust output voltage, current, outline shape, pad position and surface film finish for red dot sight and IoT product development.

Send your mechanical footprint drawing and electrical requirements via email: info@forleaves.com Our engineering team will offer technical suggestions and project‑based quotation within 24 working hours.

FAQ

Q1: What is FL‑2216 mini SMT solar panel mainly used for?
A1: It is designed for red dot reflex sight backup power and brightness auto-sensing, and also works for miniature low-power IoT sensors, tracking tags and other compact embedded electronics.

Q2: What is the advantage of matte film surface on this module?
A2: Matte lamination suppresses surface specular reflection, preventing glare which may interfere optical sight performance, while providing scratch protection for internal solar cells.

Q3: What is the advantage of BC back contact cell used in FL‑2216?
A3: BC back contact structure eliminates front-side busbar shading, reaches up to 25% cell efficiency, brings better weak-light generating performance for tiny low-power optical and IoT equipment.

Q4: What battery type matches its 5.22V Vmp output?
A4: It is used for trickle charging of small rechargeable coin cells and micro lithium batteries; a matching charge management circuit and reverse protection diode are required.

Q5: How does it perform under indoor or cloudy low light?
A5: The BC micro solar cell can generate weak trickle current under diffuse light, but full rated 10mA output is only achieved under standard bright sunlight.

Q6: Can we change the pad arrangement or cut custom shape?
A6: Yes. We can redesign pad layout and modify the outer contour according to your casing and PCB footprint for optical sight or IoT projects.

Q7: What is the standard MOQ for FL‑2216?
A7: The standard MOQ is 5000 pcs. We accept consultation for customized development projects, and you may contact our sales team if you have special trial order demands.

Q8: What shipping options are available for FL‑2216 orders?
A8: Multiple shipping solutions are supported, including express courier, air freight, sea freight and DDP delivery. We can match suitable logistics method based on order quantity, delivery timeline and destination country requirements.

Q9: Is the matte film surface resistant to scratch?
A9: The matte laminated layer offers basic scratch resistance for normal assembly and application scenarios. For applications with frequent friction or harsh outdoor environment, we can recommend upgraded surface material options.

Looking for FL‑2216 matte film mini SMT solar panels with 25% BC cell for red dot sight and miniature IoT devices?
FORLEAVES supplies tiny SMT micro PV modules with anti-glare matte surface and custom pad layout for optical and low-power electronics manufacturers. Send your footprint drawing for quotation:

info@forleaves.com

Tags:FL‑2216,mini SMT solar panel,matte film micro PV module,BC back contact solar cell,25% efficiency,5.22V 10mA solar cell,red dot sight solar power,IoT SMT solar module